KOBAU Poly-Vlies W 30
Type of crack / symbol
A.1
A.2
 
 
 
Field of application / properties

KOBAU Poly-Vlies W 30 is intended for the reinforcement of paint systems in case of plaster surface cracks type A.1 according to the classification in the BFS notice no. 19. KOBAU Poly-Vlies W 30 is preferably used for the reinforcement of hairline and net cracks in silicone resin or mineral paint systems highly permeable to water vapor. KOBAU Poly-Vlies W 30 serves also for the reinforcement as well as increase of the layer thickness in flexible coating systems. The product is a polyester/polyamide fleece consisting of continuous filaments that are thermally fixed. KOBAU Poly-Vlies W 30 is weatherproof, resistant to chemicals and solvents.

For use inside and outside.
Processing

Prepare the substrate to be reinforced according to the national regulations and/or BFS notices. Subsequently, apply embedding material uniformly until saturation using a roller or spray gun. Embed KOBAU Poly-Vlies W 30 from the roll or as a ready-cut in the wet paint avoiding wrinkle formation and bubbles. The webs should overlap in a width of approx. 5 cm. In case of complete reinforcement, roll KOBAU Poly-Vlies W 30 preferably from top to bottom. Smoothen the overlapping area to fleece thickness. After complete drying, apply the intermediate and finishing paint coat in the system.
Subsequent work is to be performed observing the instructions of the manufacturer in each case.
Technical data
Quality
PES / PA filament
Colour
natural white
Stabilization
thermal
Spec. weight DIN 53854
abt. 30 g / m²
Thickness
abt. 230 µm
Max. longitudinal tensile force
abt. 65 N / 5 cm
Max. transverse tensile force
abt. 50 N / 5 cm
Longitudinal elongation
abt. 18 %
Transverse elongation
abt. 18 %
Longitudinal tear propagation load
abt. 40 N
Transverse tear propagation load
abt. 40 N
 
 
 
 
Delivery form
Roll dimensions:
1.00 m x 50 m
(other dimensions on request)
Tools
Roll, brush, sprayer or rubber blade
Required material
approx. 300 - 1000 ml / m² embedding material as a function of the substrate roughness
Storage

dry, cool, in closed spaces
Note

Perform subsequent work taking into account the instructions of the manufacturer in each case.

The above statements reflect the current stage of development and make no claim to be exhaustive. As the application and use of our product is beyond our control and variations in use, modes of operation and materials must be tailored to the prevailing working conditions, this technical information cannot be regarded as legally binding. This edition supersedes previous technical instructions.